Your leader in Suspension and Handling (530) 677-8600
$1,849.00

2013 - Current Subaru BRZ / Scion FR-S Sport Coilover Suspension Kit

8086.71

This kit fits 2013 - Current Subaru BRZ & Scion FR-S.

  • Expected ride height change from 0 to 3 inches
  • This kit is designed to reuse your factory rear shock mounts (Optional Truss Bar and Rear Shock Mounts Shown) 
  • Ground Control FT86 Suspension Kit

  • Extensive design and testing has gone into bringing you one of the most complete and competent suspensions available for your FR-S/BRZ. From a mild street cruiser, to aggressive track sessions, this kit can be configured to handle whatever your needs may be. This suspension package gives you the complete adjustability of our exclusive Top Mount Caster/Camber plates and custom fabricated strut housings. The combination of these parts not only allows you to lower the vehicles ride height beyond that of the competitors, but also maintain suspension bump travel when lowered. This isn’t a “one size fits all” suspension, each kit is built specifically for you and the intended use of your car. 

     
    Front Coilover Strut Assemblies:

    Pre-assembled with camber plates and matching rear shocks. No spring compressor, cutting, welding or modification needed. Fabricated from 1026 DOM steel, this Ground Control strut is much stronger than the stock strut. Skip welded 0.250 flanges reduce flex while adding strength. Housings are custom fabricated to provide over 1" more bump travel. Reduced droop Koni strut inserts specially selected for your driving style are provided. Exclusive GC coilover hardware with single-locking sleeve and and your choice of Eibach springs (depending on suitability with Koni inserts). We finish off with Ground Control bump stops and grade 8 fasteners.

     
    Top Mount Camber/Caster Plates :
    More camber adjustment than stock. Ground Control designed bushings, engraved with calibrated degrees. Every component is anodized or plated, including fasteners. Adds extra travel to avoid excessive bottoming out, this is a very well engineered product and is exclusive to Ground Control. Camber and caster are quickly adjustable by sliding the mounts, without removing any components from the car. The priority of this design is to allow repeatable alignment changes for fine tuning. Integrated truss bar adds to rigidity and minimizes front chassis flex. Center sliders are designed with urethane bushings, to provide years of maintenance free service.
     
    Rear Coilover Assemblies:
    We start with a Koni Sport valved shock matched with custom Ground Control mounting hardware, grade 8 fasteners and GC bumpstop. We utilize a Koni single adjustible rear shock, top adjustable for easy rebound damping control. This shock is available in our standard default damping for standard to aggressively driven cars. The Koni shock features the exclusive GC coilover hardware with single-locking sleeve and and your choice of Eibach springs.  
     
    * Suspension is shipped assembled and preadjusted*