MCS & Ground Control Suspension

Rectangle_1677
Rectangle_1709
DSC02358-min_1
Rectangle_1710
DSC02209
DSC02206
DSC_0766
DSC_0806
DSC_0799
DSC02216

1WNR

Dyno Graph

The MCS 1WNR damper is a single-adjustable damper with an adjustment range of 18 settings. Built as an “entry-level” (yet still race-capable and winning) damper, MCS 1WNR dampers are upgradable to our other damper systems. The modular design of MCS damper systems use interchangeable parts for an easy upgrades, without the need to invest in a new package. All MCS dampers are fully rebuildable, serviceable and can be custom-valved and upgraded any time.

These dampers are packed with technical features with elegantly clean execution. The monotube design is very stable with more oil capacity and better heat dissipation than twin tube dampers. Large shafts give extremely high, low-friction side-load support unmatched by shocks inverted and converted for strut applications. The large main piston gives quick, accurate damper response and the divider piston separates oil and gas, eliminating cavitation which often causes noise and sloppiness.

The MCS 1WNR damper system rings tremendous value and capability in a clean, easy to install and use package; and for these very reasons, was chosen to be used for NASA Spec E46 and NASA Spec Iron racing series.

The MCS 2WNR damper is a double-adjustable damper with a unique adjustment mechanism for easy access and fast changes. Both compression and rebound damping forces are independently adjustable from one very clever knob, within easy reach under your hood or in your trunk. No more dragging a jack to pit lane, laying on the ground in your nice clothes or driving suit, or burns from hot brake components.

Damping forces are controlled by blow-off valves directly on the main piston for the most precise and accurate damping control, and not a needle valve with a smaller effective adjustment range before the needle is too far out of the orifice to influence flow.

These dampers are packed with technical features but with an elegantly clean execution. The monotube design is very stable with more oil capacity and better heat dissipation than twin tube dampers. Large shafts give extremely high, low-friction side-load support unmatched by shocks inverted and converted for strut applications. The large main piston gives quick, accurate damper response and the divider piston separates oil and gas, eliminating cavitation which often causes noise and sloppiness.

The MCS 2WNR damper system rings tremendous value and capability in a clean, easy to install and use package; and for these very reasons, was chosen to be used for for the NASA Spec NP01 racing series, Porsche Club Racing SP996 series, and Porsche Club Racing SP997 series.

2WNR

Dyno Graph - Compression

Dyno Graph - Rebound

2 Way

Dyno Graph - Compression

Dyno Graph - Rebound

The MCS 2W damper is a double-adjustable damper with external reservoirs which allow for adjustment of the gas pressure in the damper. Both compression and rebound damping forces are independently adjustable with the compression adjuster located on the reservoir head and the rebound adjuster located on the shaft-end.

Compression damping forces are controlled by a large blow-off valve located directly on the reservoir main piston for the most precise and accurate damping control, and not a needle valve with a smaller effective adjustment range before the needle is too far out of the orifice to influence flow.

Rebound damping forces are controlled through orifices located at the main piston assembly in the damper body and allow for precise hydraulic control of damper oil through the main piston. Utilizing orifices introduces the ability to have a wide operating range, avoiding pesky re-valves, consistency in damping adjustment per click, and virtually eliminates fatigue with usage.

These dampers are packed with technical features but with an elegantly clean execution. The monotube design is very stable with more oil capacity and better heat dissipation than twin tube dampers. Large shafts give extremely high, low-friction side-load support unmatched by shocks inverted and converted for strut applications. The large main piston gives quick, accurate damper response and the divider piston separates oil and gas, eliminating cavitation which often causes noise and sloppiness.

Remote reservoirs give superior fluid temperature control and are available (or standard depending on application) with Staubli dry-breaks for easy installation.

The MCS 3W damper is a triple-adjustable damper with external reservoirs which allow for adjustment of the gas pressure in the damper. High speed compression, low speed compression, and rebound damping forces are independently adjustable with the compression adjusters located on the reservoir head and the rebound adjuster located on the shaft-end.

High Speed Compression damping forces are controlled by a large blow-off valve located directly on the reservoir main piston for the most precise and accurate damping control, and not a needle valve with a smaller effective adjustment range before the needle is too far out of the orifice to influence flow.

Low Speed Compression damping forces are controlled through orifices located at the compression main piston assembly in the reservoir head and allow for precise hydraulic control of damper oil.

Rebound damping forces are controlled through orifices located at the main piston assembly in the damper body and allow for precise hydraulic control of damper oil through the main piston. Utilizing orifices introduces the ability to have a wide operating range, avoiding pesky re-valves, consistency in damping adjustment per click, and virtually eliminates fatigue with usage.

These dampers are packed with technical features but with an elegantly clean execution. The monotube design is very stable with more oil capacity and better heat dissipation than twin tube dampers. Large shafts give extremely high, low-friction side-load support unmatched by shocks inverted and converted for strut applications. The large main piston gives quick, accurate damper response and the divider piston separates oil and gas, eliminating cavitation which often causes noise and sloppiness.

3 Way

Dyno Graph - Low Speed Compression

Dyno Graph - High Speed Compression

Dyno Graph - Rebound

4 Way

Dyno Graph - High Speed Compression

Dyno Graph - Low Speed Compression

Dyno Graph - High Speed Rebound

Dyno Graph - Low Speed Rebound

Gas Pressure Adjustment

Schrader valves are fitted on the ends of the reservoirs. This introduces a valuable tuning tool – the ability to increase or decrease the nitrogen pressure in your damper, allowing you to increase or decrease the overall support to the vehicle. Reservoir pressure can be adjusted between 100 – 275 PSI to help support the platform in fast cornering that generates large loads or to allow more weight transfer to generate more traction in low grip scenarios.

The MCS 4W is quadruple-adjustable damper with an external reservoir. High speed compression, low speed compression, high speed rebound, and low speed rebound damping forces are independently adjustable. Gas pressure is also adjustable. The high speed compression and low speed compression adjusters are located on the remote reservoir head. High speed rebound and low speed rebound damping forces are independently adjustable from one very clever knob. With the knob in the “down” position, high speed rebound forces are adjusted. With the knob in the “up” position, low speed rebound forces are adjusted.

High speed compression damping forces are precisely controlled by a large blow-off valve located directly within the piston assembly in the remote reservoir head. Low speed compression damping forces are controlled through orifices located directly within the piston assembly in the remote reservoir head and allow for precise hydraulic control of damper oil.

High speed rebound damping forces are precisely controlled by a blow-off valve located directly directly within the piston assembly inside the damper body. Low speed rebound damping forces are controlled through orifices located at the main piston assembly in the damper body and allow for precise hydraulic control of damper oil through the main piston assembly

These dampers are packed with technical features but with an elegantly clean execution. The monotube design is very stable with more oil capacity and better heat dissipation than twin tube dampers. Large shafts give extremely high, low-friction side-load support unmatched by shocks inverted and converted for strut applications. The large main piston gives quick, accurate damper response and the divider piston separates oil and gas, eliminating cavitation which often causes noise and sloppiness. Utilizing orifices introduces the ability to have a very defined operating range, consistency in the damping force adjustment per click, and virtually eliminates fatigue with usage. Blow-off valves effectively manage high speed forces to maintain maximum mechanical grip.

A full list of Motion Control Suspension applications can be found here.

Note: Our pricing varies from MCS's listed prices for their packages.
Inquire within for our pricing.
The best in the business. If you are not buying your next set of shocks or struts from them, you are doing it wrong. The entire team lives and breathes the small details and that is what matters when you are trying to win. Keep it up!
stock_1-modified

Sean Thomson

There are two stories of my car. Without MCS and with MCS. Without was just a mid pack car with poor handling. With has completely transformed the car and I'm racking up the results. I won't build a car for competition without MCS, period!
stock_2-modified

Jon Beatty

I absolutely love these products! I have never had a better handling car and they absolutely believe in their customers. They were there for me in my time of need!
stock_3-modified

Kevin Koelemeyer

Back to the top