2013 - Current FT-86 Scion FR-S / Subaru BRZ Coilover Kit w/ Camber Plates8086.13
This kit fits The 2013 - Current Subaru Brz & Scion FR-S stock dimension dampers .
- With the added top mount Camber Plates, this kit allows the vehicle to be lowered beyond that of a standard coilover kit and still maintain bump travel. This kit does not include dampers
- Expected ride height change from 0 to 2.5 inches
Ground Control Spring Kits
This spring kit gives you the option to customize the ride height of your vehicle. After several years of use in racing applications, Ground Control spring kits have been adapted for street use. Most other spring kits offer only one set ride height when installed. The Ground Control system's unique design allows for easy adjustment. Simply lift the corner(s) of the vehicle that you wish to adjust and spin the adjustable spring seat up or down to raise or lower the vehicle*. Ground Control spring kits are also designed to be used with either stock or aftermarket shocks. Off the shelf (not GC)Koni front struts or GC hardware may need modification to clear the Koni sway bar mount, which is different than stock.
*Some applications require the use of a provided wrench.
Springs: We are pleased to announce that Eibach has chosen Ground Control as the west coast distributor for their ERS (Eibach Race Spring) line of springs. All of our ride height adjustable kits now exclusively feature Eibach springs. All racing and street/show spring rates are available. All Eibach springs offer a lifetime warranty against spring rate change and sagging.
Adjusters: All adjusters consist of a threaded sleeve and adjustable spring seat. And are made using high strength 6061-T6 aluminum; anodized for greater durability and appearance. The threads on the adjusters are square cut which locks the adjustable spring seat in place under load. For further precaution, a setscrew in the adjustable spring seat can be used to secure adjustment. Upper spring perches are used to insulate the spring.
Camber Plates: Pre-assembled with camber plates and matching rear shocks. No spring compressor, cutting, welding or modification needed. Fabricated from 1026 DOM steel, this Ground Control strut is much stronger than the stock strut. Skip welded 0.250 flanges reduce flex while adding strength. Housings are custom fabricated to provide over 1" more bump travel. Reduced droop Koni strut inserts specially selected for your driving style are provided. Exclusive GC coilover hardware with single-locking sleeve and and your choice of Eibach springs (depending on suitability with Koni inserts). We finish off with Ground Control bump stops and grade 8 fasteners.
Ground Control works very hard with Eibach USA to make these springs to the standards that you demand. Lifetime guarantee on everything, not just springs. No excuses about ";racing"; or ";special";. If anything fails, while being correctly installed, it will be taken care of, period. We can only have a guarantee like this because every single part of the Ground Control Street coil-over kit is made by us or someone we trust. None of these parts are made in Taiwan. Everything is made in the USA.
*Kit includes everything you need to convert all four corners using your existing dampers.*