Your search for "coilovers" revealed the following:

BMW E36 M3 Sway Bar Set (Front & Rear)

Racing sway bar for the E36 M3.  SWAY BAR SIZING   Mandrel bent from certified Chrome Moly alloy tubing, and features all new hardware, billet aluminum clamps and greasable bushings. Every component of this front and rear set is flawless quality. From the stress-relieved bars themselves, to the stainless steel...

BMW F87 M2 Adjustable Camber/Caster Plates

Ground Control BMW F87 SPORT Camber Plates These plates feature over 30mm of total camber adjustment with the ability to make corrective caster changes to equalize side-to-side caster in the stock position.Other features include replaceable waterproof German axial load bearings, and isolated aerospace grade strut bearings for long life, less deflection,...

E8X / E9X / F8X / G2X / G8X WEIGHT JACK HEIGHT ADJUSTER KIT (PAIR)

Ground Control Suspension system is now offering the first articulating weight jack height adjuster system for the rear of your E8X / E9X / F8X / G2X / G8X suspension. These articulating spring mounts allow your spring to keep a linear shape and therefor linear rate throughout their travel, making...

Nylon Spring Alignment Cone (PAIR)

Our nylon spring alignment cones for the BMW E30 and BMW E36/E46 and BMW Z4M Chassis. These cones are made to align the rear springs in the chassis rails.   *Made to fit 2.25" Inner diameter and 2.50" inner diameter springs only*   **SOLD AS A PAIR ONLY**

BMW E30/E36/E46 Adjustable Tie Rods, BMW E36 / E46

Not Recommended for Street Cars - Race Cars ONLY Our exclusive racing tie rod ends allow the bumpsteer to be adjusted, by moving the tie rods up and down with spacers.This is similar to the pieces used by BMW factory teams in Europe, and they recommend that the rod ends...

E30 M3 and Non-M Brake Duct Brackets

Keep those brakes cool! These brackets are compatible with OEM, OEM shortened, and Ground Control Fabricated strut housings. These brackets will allow you to run 2.50" ID ducting to ensure your brakes are kept cool and stopping as they should. These brackets take the place of the OEM dust shield...

"Hybrid" Camber Plate Insulator

ONLY FITS 2.50" ID SPRINGS SOLD INDIVIDUALLY   This is a replacement urethane pad for any of our Camber or Camber/Caster adjustable plates optioned with our "Hybrid Spring Perches."

E8X / E9X / F8X / G2X / G8X Static Rear Height Adjuster Kit (PAIR)

Our E9X/F8X/G2X/G8X Static Rear Height Adjuster Kit allows you to raise and lower the rear of your E or F chassis BMW through a 4" range. Our Static Rear Height Adjusters offer a simple, effective solution to fine tune the rear ride height of your BMW utilizing Ground Control trusted...

BMW E36 / Z3 BMW Roll Center Correction Kit

Not Recommended for Street Cars - Race Cars ONLY Our E36/Z3 Roll Center Adjusters replace the factory front lower ball joints. These new bushings assist in correcting the vehicles roll center after lowering. They are adjustable depending on your vehicles final ride height. We recommend using these bushings in conjunction...

Camber /Caster Plate, MR-2 Rear (Pair)

Bolt-in, no drilling, camber and caster adjustable upper mounts for the early MR-2.   These plates do not achieve as much negative camber as our CCP5, but there is no cutting or drilling needed. Exclusive GC design allows the sliding mount to go up against the stock sheetmetal. Trimming may...