$2,078.00

Mercedes Benz 190E Track Day/Drivers School

2513.72
external-usa-thanksgiving-dreamcreateicons-outline-color-dreamcreateicons-4
PROUDLY MADE IN THE USA
By Ground Control Suspension Systems
Helper Springs are 4" or 8" tall springs with a very low spring rate. (They can be fully compressed with just your index finger and thumb.) Their primary purpose is to keep tension on the main spring at full droop. This prevents the main spring from coming loose & settling improperly upon significant weight transfer to the opposite side of the vehicle (lifting the corner in question off the ground,) when jumping the vehicle, during aggressive or track oriented driving, or off road applications. Another benefit worth noting is their ability to keep everything 'in place' when lowering the vehicle with a hydraulic jack. Without them, you will need to make sure the main springs settle correctly into place, as well as the top hats, etc.

THIS KIT INCLUDES THE FOLLOWING:


2 SHORT Koni single adjustable struts in Ground Control shortened strut housings.

2 SHORT Koni single adjustable rear shocks 

1 Pair front Camber Plates

4 Eibach ERS springs, any racing spring rate

4 Ground Control bump stops (made in Germany)

2 Rear ride height adjusters.

* Suspension is shipped completely assembled and preadjusted*
Please note: These kits are intentionally equipped with a rigid camber/caster plate design for on-track applications. Because of this feature, some noise may be transmitted from strut shafts, sway bar links, tires, brakes, springs, wheel bearings, road surfaces, etc.
Back to the top
×